TM 9-2320-280-20-2
4-51. BLACKOUT DRIVE LIGHT LAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Gasket (Appendix G, Item 44)
Battery ground cable disconnected (para. 4-73).
Adhesive sealant (Appendix C, Item 10)
a. Removal
1. Loosen three retaining screws (2) from light door (6).
2. Remove light door (6) and gasket (3) from light body (5). Discard gasket (3).
3. Remove lamp (4).
4. Clean mating surface on light door (6) and light body (5). Remove sealant.
b. Installation
1. Install lamp (4).
2. Install gasket (3) and light door (6) to light body (5) with lens hood (1) at top.
NOTE
To prevent moisture from entering light assembly, tighten all
screws evenly.
3. Secure light door (6) by tightening three screws (2).
4. Apply thin coat of sealant to seam between light body (5) and light door (6).
4-84
