TM 9-2320-280-20-2
4-49. SERVICE HEADLIGHT ASSEMBLY REPLACEMENT
This task covets:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Material/Parts
Equipment Condition
Three lockwashers (Appendix G, Item 110)
Battery ground cable disconnected (para. 4-73).
Hood raised and secured (TM 9-2320-2801-10).
NOTE
Prior to removal, tag leads for installation.
Note position of circuit 91 for installation.
a. Removal
1. Remove three nuts (4) and lockwashers (5) from headlight assembly (1)
lockwashers (5).
2. Remove leads 17 (2), 18 (3), and 91 (7) from headlight assembly (1).
3. Remove headlight assembly (1) from hood (6).
b. Installation
and hood (6). Discard
N O T E
Circuit numbers are marked on headlight next to respective
connector.
1. Connect leads 17 (2), 18 (3), and 91 (7) to headlight assembly (1).
2. Install headlight assembly (1) to hood (6) with three lockwashers (5) and nuts (4).
4-80
