Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont'd)ITEMNO.INTERVALITEM TO BEINSPECTEDPROCEDURESTM 9-2320-280-20-1Change 12-21NOT FULLY MISSIONCAPABLE IF:e. Check for loose, missing, or e. Any broken studs, orbroken wheel studs and nuts.loose or missing wheelnuts.(1) Release air pressure from tire(para. 8-4 or 8-5).(2) Wheel configurations:(a) 12-bolt configuration –Tighten locknuts to 85 lb-ft (115 N•m)in sequence shown; repeat torquesequence at 125 lb-ft (170 N•m).(3) Inflate tire to recommended tirepressure (TM 9-2320-280-10).CAUTIONPrior to checking torque, the tireassembly must be deflated.CAUTIONTighten locknuts gradually to avoidbent and broken studs, or damage towheel components will result.19Semi-TiresAnnual(Cont’d)8-BOLT TIGHTENING SEQUENCE(b) 8-bolt configuration –Tighten locknuts to 55 lb-ft (75 N•m)in sequence shown; repeat torquesequence at 65 lb-ft (88 N•m).12-BOLT TIGHTENING SEQUENCE
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business