Table 2-1. Unit Level Preventive Maintenance Checks and Services HMMWV (Cont'd)
ITEM
NO.
INTERVAL
ITEM TO BE
INSPECTED
PROCEDURES
15
Semi-
Transfer
Annual
(Contd)
d. Inspect oil cooler lines for leaks or
d. Any class III oil
damage. Check for loose oil cooler line
leak or damage to
nuts and damage to the spiral wrap on
spiral wrap.
the cooler line. If oil cooler line nuts are
loose, hold end of oil cooler stationary, and
tighten line nuts to 194-212 lb-in.
(22-24 Nm)
16
Semi-
Driveline
a. Inspect geared hub vent lines and
a. Hub vent lines
Annual
Compo-
connectors for security, cracks, and
cracked, plugged, or
nents
deterioration.
missing.
b. Inspect geared hub for leaking
b. Class III leaks or
seals and damage.
damage.
c. Adjust spindle bearing
c. Bearing damaged.
(paragraph 6-14).
d. Inspect differential vent lines and
d. Differential vent line
connectors for security, cracks, and
has hole, plugged, or
deterioration.
cracked.
e. Inspect differentials for leaking
e. Class III leak.
seals and cracks.
TM 9-2320-280-20-1
Change 1
2-17
NOT FULLY MISSION
CAPABLE IF:
NOTE
Do not overtorque retaining nuts.
CAUTION
Change geared hub and differential
lubricants when required by mainte-
nance repair action, contaminated by
water or foreign material, or if
lubricant appears by smell, feel, or
visual indication to be overheated.
NOTE
Fill each axle differential with 2
quarts (1.9 L) of GO.
Fill each geared hub with 1 pint
(0.5 L) of GO.
