25-37. LEFT SIDE TUNNEL INTERIOR INSULATION REPLACEMENT
This task covers:
a. Removal
b. Installation
TM 9-2320-387-24-2
25-116
Change 1
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Equipment Condition
A/C coolant line covers removed (para. 25-32).
Maintenance Level
Direct Support
1.
Remove left rear interior tunnel insulation (4) from left side tunnel (5).
2.
Remove two capscrews (7), washers (8), and left front interior tunnel insulation (9) from left side
tunnel (5).
3.
Remove six screws (6) and left front top tunnel insulation (2) from tunnel (3).
4.
Remove three interior insulation retainers (1) from left front top tunnel insulation (2).
1.
Install three interior insulation retainers (1) on left front top tunnel insulation (2).
2.
Install left front top tunnel insulation (2) on tunnel (3) with six screws (6).
3.
Apply sealing compound to threads of two capscrews (7), and install left front interior tunnel
insulation (9) on left side tunnel (5) with capscrews (7) and washers (8). Tighten capscrews (7) to 23
lb-ft (31 Nm).
4.
Install left rear interior tunnel insulation (4) on left side tunnel (5).
b. Installation
a. Removal
