TM 9-2320-387-24-2
25-112
Change 1
25-35. A/C WIRING HARNESS AND CABLE MAINTENANCE (Cont’d)
40.
Route A/C wiring harness (2) rearward along left side tunnel (3).
41.
Connect A/C wiring harness connector (9) to rear A/C evaporator connector (4).
42.
Route remaining section of A/C wiring harness (2) through grommet (7) in left rear wheelhouse (8)
and up through grommet (5) in left rear wheelwell (6).
43.
Apply sealing compound to threads of four capscrews (14).
44.
Install A/C condenser (12) on left rear wheelwell (6) with four washers (13) and capscrews (14).
Tighten capscrews (14) to 6 lb-ft (8 N•m).
45.
Route A/C wiring harness (2) over forward end of A/C condenser (12) and connect two A/C wiring
harness connectors (11) to A/C condenser fan connectors (10).
46.
Secure A/C wiring harness (2) to fan grille (15) with tiedown straps (1) as required.
47.
Secure A/C wiring harness (2) along left side tunnel (3) with tiedown straps (1) as required.
48.
Secure A/C wiring harness (2) in engine compartment with tiedown straps (1) as required.
2
1
1
2
3
1
