TM 9-2320-387-24-2
25-110
Change 1
25-35. A/C WIRING HARNESS AND CABLE MAINTENANCE (Cont’d)
33.
Connect A/C wiring harness connectors (7) and (8) to trinary switch connectors (6) and (9).
34.
Connect A/C wiring harness connector (4) to pressure switch connector (5).
35.
Connect A/C wiring harness connector (2) to A/C compressor clutch connector (3).
36.
Route loose end of A/C wiring harness (1) across engine compartment, over upper oil dipstick
support bracket (11), and down left side of engine compartment and secure with tiedown straps (10)
as required.
37.
Slide CTIS cover (20) forward until foil insulation (18) on A/C hose assemblies (15) and (16) and
A/C hose (13) is in contact with CTIS cover (11).
38.
Pull A/C wiring harness (1) rear until foil insulation (19) extends through CTIS cover (20)
approximately 1-in. (2.5 cm).
39.
Apply sealing compound to two screws (12), and install CTIS cover (20) on vehicle body (17)
with screws (12) and screw (14).
1
2
3
5
6
9
8
7
4
BLACK
GREEN
GREEN
BLACK
BLACK/WHITE
RED/WHITE
BLACK/WHITE
BLUE/RED
BLUE/WHITE
BLUE
TRINARY
SWITCH
A/C
RECEIVER
DRYER
A/C COMPRESSOR
A/C CLUTCH
