25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d)
TM 9-2320-387-24-2
Change 1
25-36.21
NOTE
Step a. is performed to temporarily install a new right front
underbody armor segment in order to perform match-drilling and
provide a secure interface with other vehicle body armor brackets
and liners prior to final installation.
1.
Install passenger side footwell upper armor (6) on A-pillar cowl (4) with two capscrews (3), four
washers (2), and two nuts (5). Tighten nuts (5) to 10 lb-ft (14 N•m).
2.
Using lower right deflector (7) as a template, match-drill three 13/32-in. (10.3-mm) diameter holes
from lower right deflector (7) through passenger side footwell upper armor (6).
a. New Passenger Side Footwell Upper Armor Installation
1
6
2
5
2
3
4
7
MATCH-DRILL 13/32-IN. (10.3-MM)
DIAMETER HOLES (3 PLACES)
