25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION
TM 9-2320-387-24-2
25-36.20
Change 1
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four flatwashers (Appendix G, Item 51.1)
Two capscrews (Appendix G, Item 20.1)
Twelve AVK fasteners (Appendix G, Item 3.1)
Sixty-two locknuts (Appendix G, Item 169)
Two nuts (Appendix G, Item 243.1)
Sealing compound (Appendix C, Item 72.1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Air cleaner removed (para. 3-12).
Engine access cover removed (para. 10-22).
Air distribution duct removed (para. 11-81).
Tunnel insulation removed (para. 10-33).
Right front underbody armor removed (para. 11-38).
Passenger side footwell outer armor removed
(para. 25-28).
Passenger side footwell inner armor removed
(para. 25-30).
Passenger side upper cowl liner removed
(para. 25-36).
General Safety Instructions
Right front underbody armor is extreemly.
and must be supported during removal and
installation.
Maintenance Level
Direct Support
This task covers:
a. New Passenger Side Footwell
c.
New Passenger Side Footwell
Upper Armor Installation
Inner Armor and Inner/Outer
b. New Passenger Side Footwell
Cowl Reinforcement Installation
Outer Armor Installation
d. New Right Front Underbody
Armor Installation
WARNING
Right front underbody armor is extremely heavy and must be
supported during removal and installation. Failure to do so may
result in injury to personnel or damage to equipment.
NOTE
Installing a new right front underbody requires match-drilling of
the underbody to the vehicle. In addition, the passenger side
footwell upper armor, passenger side footwell outer armor,
passenger side footwell inner armor, and passenger side
inner/outer cowl reinforcement will have to be replaced.
