25-13.3. RIGHT FRONT UNDERBODY ARMOR INSTALLATION (Contd)
TM 9-2320-387-24-2
25-36.22
Change 1
1.
Install passenger side footwell outer armor (2) and spacer (6) on right A-beam armor (3) with
capscrew (1). Do not tighten capscrew (1).
2.
Install spacer (4) and four capscrews (5) on A-beam armor (3). Tighten capscrews (1) and (5) to
35 lb-ft (47 Nm).
3.
Using A-pillar armor (7) as a template, match-drill twenty-four 13/32-in. (10.3-mm) diameter holes
from A-pillar armor (7) through passenger side footwell outer armor (2).
NOTE
Capscrews in step 4 are installed in darkened hole locations in
A-pillar armor.
4.
Install ten capscrews (9) and locknuts (8) through A-pillar armor (7) and passenger side footwell
outer armor (2). Tighten locknuts (8) to 35 lb-ft (47 Nm).
b. New Passenger Side Footwell Outer Armor Installation