NOTE
If new passenger side footwell outer armor is being installed,
perform para. 11-38.1.
NOTE
Note location of capscrews, nuts, and spacers for installation.
1.
Remove six locknuts (11), spacers (12), and capscrews (1) from footwell armor (2) and outer cowl (7).
Discard locknuts (11).
2.
Remove twenty-four locknuts (9) and capscrews (5) from footwell armor (2), A-pillar armor (4), and
outer cowl (7). Discard locknuts (9).
3.
Remove four capscrews (10) from footwell armor (2) and A-beam armor (6).
3.1.
Remove nut (12.2) and capscrew (12.1) from footwell armor (2).
4.
Remove capscrew (13), footwell armor (2), and spacers (3) and (8) from outer cowl (7).
Refer to para. 10-56 for plusnut inspection and replacement.
1.
Apply sealing compound to threads of four capscrews (10), and install spacer (8) and footwell armor (2)
on A-beam armor (6) with capscrews (10). Tighten capscrews (10) to 37 lb-ft (50 N•m).
1.1.
Install capscrew (12.1) and nut (12.2) on footwell armor (2).
2.
Apply sealing compound to threads of capscrew (13), and install spacer (3) and capscrew (13) on
footwell armor (2) and A-beam armor (4). Tighten capscrew (13) to 37 lb-ft (50 N•m).
3.
Install twenty-four capscrews (5) and locknuts (9) on footwell armor (2), A-pillar armor (4), and
outer cowl (7). Tighten locknuts (9) to 37 lb-ft (50 N•m).
b. Installation
a.1. Inspection
a. Removal
25-10. PASSENGER SIDE FOOTWELL OUTER ARMOR MAINTNEANCE
This task covers:
a.
Removal
b.
Installation
a.1. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Thirty locknuts (Appendix G, Item 169)
Sealing compound (Appendix C, Item 72.1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Equipment Condition
• A/C heater/evaporator assembly removed
(para. 25-21).
• Right front cowl insulation removed (para. 10-32).
Maintenance Level
Direct support
TM 9-2320-387-24-2
25-28
Change 1
