1.
Remove pin (16), thumb block (18), and spring (17) from bracket (15).
2.
Remove two locknuts (2), capscrews (11), washers (10), right-hand evaporator bracket (9), and strap
bracket (8) from upper track (4) and lower track (23). Discard locknuts (2).
3.
Remove two locknuts (3), capscrews (7), washers (6), and left-hand evaporator bracket (5) from
upper track (4) and lower track (23). Discard locknuts (3).
4.
Remove seven locknuts (1) and screws (30) from upper track (4) and C-pillar partition (32). Discard
locknuts (1).
5.
Remove upper track (4), upper guide (12), and strip (13) from C-pillar partition (32).
6.
Remove seven screws (29) from upper guide (12) and separate upper guide (12) from upper track (4).
7.
Remove door (14) and strip (27) from lower guide (25).
8.
Remove two nuts (20), four capscrews (28), handle (19), and bracket (15) from door (14).
9.
Remove seven screws (26) and lower guide (25) from lower track (23).
10.
Remove bumper (22) and nut (21) from lower track (23).
11.
Remove seven locknuts (31), capscrews (24), and lower track (23) from C-pillar partition (32).
Discard locknuts (31).
Refer to para. 10-56 for plusnuts inspection and replacement.
b. Inspection
a. Removal
25-12. C-PILLAR DOOR, GUIDES, TRACK, AND DOOR STOP MAINTENANCE
This task covers:
a. Removal
c. Installation
b. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Automotive maintenance and repair: field
maintenance, basic (Appendix B, Item 6)
Materials/Parts
Eighteen locknuts (Appendix G, Item 178)
Sealing compound (Appendix C, Item 72.1)
Equipment Condition
• Left passenger seat removed (para. 10-45).
• A/C evaporator assembly (rear) removed
(para. 25-27).
Manual References
TM 9-2320-387-24P
Maintenance Level
Direct support
TM 9-2320-387-24-2
25-32
Change 1
