TM 9-2320-387-24-2
19-4. TRANSMISSION/TRANSFER
CASE ASSEMBLY INSTALLATION
This task covers:
Installation
INITIAL SETUP:
TOOIS
General mechanic’s tool kit:
automotive (Appendix B, Item 11
Materials/Parts
Two lockwashers
(Appendix G, Item 213)
Two cotter pins (Appendix G, Item 27)
Four tiedown straps (Appendix G, Item 4621
Two locknuts (Appendix G, Item 130)
Personnel Required
One mechanic
One assistant
Manual References
TM-9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Transmission/transfer
case assembly
prepared
for
installation
(para. 19-5).
General Safety Instructions
l Torque converter and transmission must be
installed as an assembly. Transmission must be
level.
l Do not use hands to free transmission/transfer
case assembly of hangups or snags.
Maintenance
Level
Direct support
1
Installation
]
WARNING
Torque converter and transmission must be installed as an
assembly. Keep transmission level. The torque converter may slide
off front of transmission and cause injury to personnel or damage
to converter.
CAUTION
l Torque converter must be properly installed in transmission or
transmission damage will result.
l Safety chain must be routed under transmission oil cooler lines
or damage to cooler lines will result.
19-7
