TM 9-2320-387-24-2
1 19-4. TRANSMlSSiON/TRANSFER’CASE ASSEMBLY INSTALLATION (Cont’d)
1.
Place transmission (3) and transfer case (4) on transmission jack and secure with safety chain.
WARNING
Do not use hands to free transmission/transfer case assembly of
hangups or snags. Use prybar to avoid injury.
CAUTION
Always install transmission/transfer case assembly slowly. Raise
into chassis carefully, and closely observe all components to
prevent damage.
2.
Position transmission (3) and transfer case (4) under vehicle and raise into place, aligning converter
housing pilot holes (9) with engine dowels (8).
NOTE
Ensure torque converter rotates freely
3.
Move transmission (3) forward onto engine dowels (8). Install transmission (3) on engine (1) with
four capscrews (7) and two studs (2). Tighten capscrews (7) and studs (2) to 35 lb-R (47 N-m).
4.
Connect main vent line (5) to transmission/transfer case vent line (6).
5.
Raise transmission (3) and transfer case (4) and remove stand supporting engine (1).
19-8
