TM 9-2320-387-24-2
18-4. STARTER REPAIR (Cont’d)
3.
Remove four nuts (6), lockwashers (7), and two solenoid lead connectors (8) from field and armature
terminals on starter motor frame (9) and solenoid (11). Discard lockwashers (7).
4.
Remove four capscrews (10) and solenoid (11) from starter motor frame (9).
5.
Scribe a locating mark (12) on commutator end frame (16) and starter motor frame (9).
6.
Remove four capscrews (15), commutator end frame (16), and gasket (17) from starter motor
frame (9). Discard gasket (17).
NOTE
Measure and note combined thickness of thrust washer(s) and
spacer for installation.
7.
Remove thrust washer(s) (14) and spacer (13) from armature shaft (19). Discard spacer (13) and
thrust washer(s) (14).
8.
Remove oil felt washer (18) from commutator end frame (16). Discard felt washer (18).
18-l 3
