TM 9-2320-387-24-2
10-23. ENGINE LEFT SPLASH SHIELD MAINTENANCE (Cont’d)
1 d. Installation 1
NOTE
Perform steps 2 and 4 through step 9 for Ml114 models only.
Perform steps 1 through 9 for Ml113 models only.
Ensure left splash shield clears oil cooler lines.
1.
2.
Install splash shield (1) on airlift bracket (15) with washer (241, capscrew (251, washer (181,
washer (171, and locknut (16). Tighten capscrew (25) to 10 lb-R (14 N*m).
Install splash shield (1) on master cylinder bracket (21) with washer (221, capscrew (23), washer (20),
and locknut (19).
3.
4.
5.
Install splash shield (1) on airlift bracket (15) with washer (28), washer (271, and capscrew (26).
Install splash shield (1) on support bracket (31) with washer (301, capscrew (29), washer (141, and
locknut (41). Tighten capscrew (29) to 15 lb-ft (20 Nom).
Install harness and clamp (43) on splash shield (1) with screw (44) and nut and lockwasher
assembly (42).
6.
7.
8.
Install connector (47) on plate (36) with four screws (45) and nuts (46).
Install plate (36) on splash shield (1) with four washers (341, washers (331, and capscrews (32).
Install spring nuts (35) and plate (36) on headlight housing (40) with washer (38) and hex-head
screws (37) and (39).
9.
Connect hood harness connector (48) to connector (47).
-17
n
0
FOLLOW-ON TASKS: . Install fuel drainvalve (Ml114 only) (para. 3-35).
. Install hood prop rod and bracket (para. 10-8).
l Connect battery ground cables (para. 4-68).
10-41
