TM 9-2320-387-24-2
1 10-22. ENGINE ACCESS COVER MAINTENANCE (Cont’d)
I
p5izsq
NOTE
For rivet replacement instructions, refer to para N-56.
1.
Remove seven rivets (51, retainers (21, and insulation (3) from access cover (41.
2.
Remove seal (1) from access cover (4).
3.
Remove four retaining rings (61, two washers (71, ring studs (81, and washers (71 from access cover (41.
4.
Remove two locknuts (141, shoulder bolts (171, and latches (16) from access cover (4). Discard lock-
nuts (141.
5.
Remove two rivets (181, backing plates (151, and guide plates (19) from access cover (4).
6.
Remove two rivets (12) and keepers (11) from holddown brackets (91.
7.
Remove eight rivets (101, two holddown brackets (91, and backing plates (13) from access cover (4).
rxEziq
1.
Install two holddown brackets (9) and backing plates (13) on access cover (4) with eight rivets (10).
2.
Install two keepers (11) on holddown brackets (9) with two rivets (121.
3.
Install two backing plates (15) and guide plates (19) on access cover (4) with two rivets (18).
4.
Install two latches (16) on guide plates (191 and access cover (41 with two shoulder bolts (17) and
locknuts (14).
5.
Install two washers (7) and ring studs (8) on access cover (4) with two washers (7) and four retaining
rings (6).
6.
Install insulation (3) on access cover (4) with seven retainers (21 and rivets (5).
7.
Install seal (1) on access cover (41.
r-zxzzq
1.
Install access cover (4) on vehicle with two ring studs (8).
2.
Install two holddown latches (16) on holddown strikes (20).
3.
Latch two flexible latches (21) to keepers (11) on holddown brackets (9).
10-36
