I
12-47. SENSOR CUP VENT LINE REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml113
Tools
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
General mechanics
tool kit:
automotive
(Appendix
B, Item 1)
Equipment Condition
l Hood raised and secured
(TM 9-2320-387-10).
l Engine
access cover removed
(para. 10-22).
Maintenance
Level
Unit
1 a. Removal
1
1.
Loosen clamp (3) and disconnect
sensor cup vent line (1) from CDR valve (2).
2.
Loosen clamp (6) and remove vent line (1) from sensor cup (5).
3.
Remove two clamps (3) and (6) from vent line (1).
b. Installation
1.
Install two clamps (3) and (6) on vent line (1).
2.
Route vent line (1) through A-beam (4).
3.
Connect vent line (1) to sensor cup (5) with clamp (6).
4.
Connect vent line (1) to CDR valve (2) with clamp (3).
FOLLOW-ON TASKS: l Install engine access cover (para. 10-22).
l Lower and secure hood (TM 9-2320-387-10).
12-82