TM 9-2320-387-24-2
12-44.
CDR VALVE VENT LINE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml113
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two tiedown straps (Appendix G, Item 462)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
1.
Loosen clamp (2) and disconnect CDR valve vent line (3) from CDR valve (1).
2.
Remove two tiedown straps (5) from vent line (31 and existing hoses (6) on A-beam (4). Discard
tiedown straps (5).
3.
Loosen clamp (2) and remove vent line (3) from elbow (8) on selector valve (7).
4.
Remove clamps (2) from vent line (3).
b. Installation
1.
Install clamps (2) on vent line (3).
2.
Connect vent line (3) to elbow (8) on selector valve (7) with clamp (2).
3.
Install vent line (3) along A-beam (4) on existing hoses (6) with two tiedown
4.
Connect vent line (3) to CDR valve (1) with clamp (2).
straps (5).
FOLLOW-ON
TASK:
Lower and secure hood (TM 9-2320-387-101.
12-79
