TM 9-2320-387-24-2
13-8. REPAIR, PAINTING, AND PRESERVATION
& All equipment deficiencies noted during inspections should be repaired in accordance with vehicle
TMs.
b. All unpainted metal surfaces must be protected during storage or shipment. Inspect, clean, and spot-
paint metal surfaces as required in TM 9-2320-387-10. Unpainted exposed machined surfaces must be
prepared with corrosion-preventive compounds or oil and grease as referenced in TM 9-2320-387-10. Be sure
to select preservatives that will not harm vehicle interior components.
c. Sunlight, heat, moisture, and dirt accelerate deterioration. Install all covers authorized for the
equipment. Close and secure all openings except those required for venting and drainage. Seal all openings
to prevent the entry of rain, snow, or dust.
d. Inflate tires to a maximum of 30 psi (207 kPa).
13-9. LUBRICATION
Lubricate vehicles in accordance with TM 9-2320-387-10 before shipment or storage.
13-l 0. RECORDS AND REPORTS
Maintenance records required by AR 750-l wiIl be maintained and reports submitted in accordance with
DA Pam 738-750 and AR 220-l.
13-3/( 13-4 blank)
