TM 9-2320-387-24-2
12-42. FUEL TANK VENT STACK TUBE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Ml113
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 229)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
1 a. Removal
1
1.
Disconnect fuel tank vent line (8) from fuel tank vent stack tube (2).
2.
Remove nut (lo), screw (7), lockwasher (91, and clamp (6) from fuel tank vent stack tube (2) and air
intake assembly (1). Discard lockwasher (9).
3.
Remove screw (51, lockwasher (41, fuel tank vent stack tube (21, and clamp (3) from air intake
assembly (1). Discard lockwasher (4).
b. Installation
1.
Install fuel tank vent stack tube (2) and clamp (3) on air intake assembly (1) with lockwasher (4)
and screw (5).
2.
Install fuel tank vent stack tube (2) and clamp (6) on air intake assembly (1) with lockwasher (91,
screw (7), and nut (10).
3.
Connect vent line (8) to vent stack tube (2).
FOLLOW-ON TASK:
Lower and secure hood (TM 9-2320-387-10).
12-76
