TM 9-2320-387-24-2
Change 1
12-68.23
12-36.5. 10,500 LB REAR HYDRAULIC WINCH VALVE ASSEMBLY REPLACEMENT (Cont’d)
10.
Remove two screws (11) from shield (12) and top left cowl armor (17).
11.
Remove two locknuts (13), capscrews (15), six washers (14), shield (12), and valve assembly (1)
from bracket (16). Discard locknuts (13).
1.
Install valve assembly (1) and shield (12) on bracket (16) with two capscrews (15), six
washers (14), and two locknuts (13).
2.
Install shield (12) on top left cowl armor (17) with two screws (11).
b. Installation
14
13
12
11
15
16
17
1
