TM 9-2320-387-24-2
12-68.20
Change 1
12-36.5. 10,500 LB REAR HYDRAULIC WINCH VALVE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Tiedown strap (Appendix G, Item 463)
Two locknuts (Appendix G, Item 186.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Battery ground cables disconnected
(para. 4-68).
Maintenance Level
Unit
CAUTION
Cover or plug power steering gear and hydro-boost connections
immediately after removing hoses to prevent contamination.
Remove all plugs prior to connecting hoses.
1.
Remove tiedown strap (11) from lead wire (1), controller plug harness (2), and valve assembly
wires (9). Discard tiedown strap (11).
2.
Disconnect controller plug lead 785C (5) from valve assembly lead 785C (8).
3.
Disconnect controller plug lead 785B (3) from circuit breaker (4).
4.
Disconnect controller plug lead 785A (6) from valve assembly lead 785A (7).
5.
Remove screw (12) and controller ground lead (10) from circuit breaker (4).
a. Removal
