TM 9-2320-387-24-2
Change 1
12-68.19
12-36.4. 10,500 LB REAR HYDRAULIC WINCH HOSE REPLACEMENT (Cont'd)
13.
Connect hydraulic hose assembly (13) to port 3 elbow (12) on valve assembly (11).
14.
Route hydraulic hose assembly (13) from port 3 elbow (12) under valve assembly (11).
NOTE
• Ensure area around hydro-boost and power steering gear port is
clean before installing power steering hose assembly.
• Lubricate O-rings with Dexron III® prior to installation.
15.
Install O-ring (14) on hydraulic hose assembly (13) and connect hydraulic hose assembly (13) to
hydro-boost (15).
16.
Connect hydraulic hose assembly (9) to port 1 elbow (10) on valve assembly (11).
17.
Route hydraulic hose assembly (9) from port 1 elbow (10) on valve assembly (11) along left inner
cowl to power steering gear port (17).
18.
Install O-ring (16) on hydraulic hose assembly (9) and connect hydraulic hose assembly (9) to
power steering gear port (17).
11
10
9
12
13
16
17
14
15
FOLLOW-ON TASKS: • Connect battery ground cables (para. 4-68).
• Bleed power steering system (para. 8-27).
• Install engine left splash shield (para. 10-23).
