11-64. COMMANDER’S CONTROL BOX MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove three locknuts (5), two washers (4), screw (1), two screws (2), and commander’s control box
mounting bracket (6) from underside of radio rack (3). Discard locknuts (5).
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Three locknuts (Appendix G, Item 109)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
b. Installation
Install commander’s control box mounting bracket (6) on underside of radio rack (3) with screw (1), two
screws (2), washers (4), and three locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N•m).
TM 9-2320-387-24-2
11-124
Change 1
1
3
2
2
4
5
6
