11-67. RIFLE MOUNTING CLAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Six locknuts (Appendix G, Item 133)
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
TM 9-2320-387-24-2
11-128
Change 1
NOTE
Perform step 1 and 2 for removal of left front rifle mounting clamp.
Perform step 3 for removal of right front rifle mounting clamp.
Perform step 4 for removal of right rear rifle mounting clamp.
1.
Remove two screws (1.1) and clamp bracket (1) from turret support (4).
2.
Remove two locknuts (2.1), screws (3), and clamp (2) from clamp bracket (1) and turret support (4).
Discard locknuts (2.1).
3.
Remove two locknuts (9), screws (7), and clamp (6) from clamp bracket (8) on radio rack (5). Discard
locknuts (9).
4.
Remove two locknuts (11), screws (14), and clamp (10) from clamp bracket (13) on B-pillar (12).
Discard locknuts (11).
NOTE
Perform step 1 and 2 for installation of left front rifle mounting
clamp. Perform step 3 for installation of right front rifle mounting
clamp. Perform step 4 for installation of right rear rifle mounting
clamp.
1.
Install clamp (2) on clamp bracket (1) with two screws (3) and locknuts (2.1).
2.
Apply sealing compound to threads of two screws (1.1) and install clamp bracket (1) on turret
support (4) with screws (1.1).
3.
Install clamp (6) on clamp bracket (8) and radio rack (5) with two screws (7) and locknuts (9).
4.
Install clamp (10) on clamp bracket (13) and B-pillar (12) with two screws (14) and locknuts (11).
b. Installation
a. Removal
LEFT SIDE FRONT
1
4
3
2.1
1.1
5
6
7
8
9
RIGHT SIDE REAR
10
11
13
12
RIGHT SIDE FRONT
14
2
