11-66. RIFLE SUPPORT MAINTENANCE
This task covers:
a.
Removal
b. Installation
a.1. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
NOTE
Perform step 1 for removal of left front rifle support. Perform
step 2 for removal of right front rifle support. Perform step 3 for
removal of right rear rifle support.
1.
Remove capscrew (2) and rifle support (1) from floor tunnel (3).
2.
Remove two capscrews (5) and rifle support (4) from right footwell (6).
3.
Remove two capscrews (7) and rifle support (10) from bracket (9).
Refer to para. 10-56 for plusnut (8) inspection and replacement.
NOTE
Perform step 1 for installation of left front rifle support. Perform
step 2 for installation of right front rifle support. Perform step 3
for installation of right rear rifle support.
1.
Apply sealing compound to threads of capscrew (2), and install rifle support (1) on floor tunnel (3)
with capscrew (2). Tighten capscrew (2) to 68-82 lb-in. (8-9 N•m).
2.
Apply sealing compound to threads of two capscrews (5), and install rifle support (4) on right
footwell (6) with capscrews (5). Tighten capscrews (5) to 68-82 lb-in. (8-9 N•m).
3.
Apply sealing compound to threads of two capscrews (7), and install rifle support (10) on bracket (9)
with capscrews (7). Tighten capscrews (7) to 68-82 lb-in. (8-9 N•m).
b. Installation
a.1. Inspection
a. Removal
TM 9-2320-387-24-2
11-126
Change 1
