11-44. B-PILLAR ARMOR REPLACEMENT (Cont’d)
FOLLOW-ON TASK: Install rear door and hinge (para. 11-2.1).
TM 9-2320-387-24-2
Change 1
11-91
3.
Install B-pillar armor (1) on B-pillar back-up armor (2) with two capscrews (17) and locknuts (4).
Tighten locknuts (4) to 10 lb-ft (13 N•m).
4.
Install three capscrews (16), washers (10), shims (11) and (11.1), and three locknuts (9) on B-pillar
armor (1) and bracket (8). Tighten locknuts (9) to 51 lb-ft (69 N•m).
4.1. If new spacer (13) is installed, it will be necessary to match-drill two 17/64-in. (6.7 mm) diameter
holes through B-pillar armor (1) and B-pillar back-up armor (2) into spacer (13).
5.
Install B-pillar armor (1) on B-pillar back-up armor (2) with two rivets (15).
6.
Seal top of B-pillar armor (1) with adhesive.
1
2
3
10
11
16
17
14
13
12
15
MATCH-DRILL 17/64-IN. (6.7 MM)
DIAMETER HOLES (2 PLACES)
5
4
6
7
9
11.1
8
