Remove four capscrews (2), bottom left side armor (3), and four washers (4) from body (1).
Refer to para. 10-56 for plusnut inspection and replacement.
Apply sealing compound to threads of four capscrews (2), and install four washers (4) and bottom left
side armor (3) on body (1) with capscrews (2). Tighten capscrews (2) to 68-82 lb-in. (8-9 Nm).
b. Installation
a.1. Inspection
a. Removal
11-46. C-PILLAR BOTTOM LEFT SIDE ARMOR MAINTENANCE
This task covers:
a. Removal
b. Installation
a.1. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
TM 9-2320-387-24-2
11-94
Change 1
1
4
2
3