11-42. A-BEAM LEFT SIDE ARMOR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Equipment Condition
• Driver’s side door removed (para. 11-2).
• Left front underbody armor removed
(para. 11-36).
Maintenance Level
Unit
TM 9-2320-387-24-2
11-86
Change 1
1.
Remove two capscrews (6) and washers (5) from A-beam armor (1) and body (7).
2.
Remove six capscrews (3), A-beam armor (1), and spacer (4) from left side footwell outer armor (2).
1.
Apply sealing compound to threads of six capscrews (3), and install spacer (4) and A-beam armor (1)
on left side footwell outer armor (2) with capscrews (3). Tighten capscrews (3) to 37 lb-ft (50 N•m).
2.
Apply sealing compound to threads of two capscrews (6), and install A-beam armor (1) on body (7)
with two washers (5) and capscrews (6). Tighten capscrews (6) to 37 lb-ft (50 N•m).
b. Installation
a. Removal
