11-48. FIREWALL ARMOR MAINTENANCE
This task covers:
a. Removal
c.
Installation
b. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
• Hood raised and secured (TM 9-2320-387-10).
• Left front firewall cowl armor removed
(para. 11-49).
Maintenance Level
Unit
TM 9-2320-387-24-2
11-96
Change 1
1.
Remove capscrew (3) and left front firewall armor (1) from body (2).
2.
Remove two capscrews (5) and right side firewall armor (4) from body (2).
3.
Remove two capscrews (7) and center firewall armor (6) from body (2).
Refer to para. 10-56 for plusnut inspection and replacement.
NOTE
Apply sealing compound to capscrews prior to installation.
1.
Install center firewall armor (6) on body (2) with two capscrews (7). Tighten capscrews (7) to
68-82 lb-in. (8-9 N•m).
2.
Install right side firewall armor (4) on body (2) with two capscrews (5). Tighten capscrews (5) to
68-82 lb-in. (8-9 N•m).
3.
Install left front firewall armor (1) on body (2) with capscrew (3). Tighten capscrew (3) to
68-82 lb-in. (8-9 N•m).
c. Installation
b. Inspection
a. Removal
2
3
1
