INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Four locknuts (Appendix G, Item 144.1)
Eight locknuts (Appendix G, Item 178)
Sealing compound (Appendix C, Item 72.1)
Adhesive (Appendix C, Item 2.1)
Personnel Required
One mechanic
One assistant
WARNING
Right rear underbody armor plate is extremely heavy and must be
supported during removal and installation. Failure to do so may
result in injury to personnel or damage to equipment.
1.
Remove socket-head screw (6), capscrew (5), washer (4), and tiedown (7) from right rear underbody
armor (24) and wheelwell (8).
2.
Remove two locknuts (29), capscrews (10), and washers (9) from right rear underbody armor (24)
and wheelwell (8). Discard locknuts (29).
3.
Remove three locknuts (32), capscrews (34), and washers (35) from bracket (25). Discard
locknuts (32).
4.
Remove three capscrews (27), washers (26), and bracket (25) from right rear underbody armor (24).
5.
Remove five capscrews (30), washers (31), and bracket (15) from right rear underbody armor (24).
6.
Remove four socket-head screws (21) and two plates (22) from right rear underbody armor (24) and
two brackets (18).
7.
Remove three locknuts (28), capscrews (1), and bar (3) from armor plate (33) and wheelwell (8).
Discard locknuts (28).
8.
Remove eighteen socket-head screws (23), right rear underbody armor (24), and armor plate (33)
from rocker panel (14) and wheelwell (8).
9.
Remove three capscrews (12), bar (13), and spacer (20) from body.
NOTE
Perform step 10 if brackets and clamps are damaged.
10.
Remove four locknuts (17), clamps (16), and two brackets (18) from frame rail (11). Discard
locknuts (17).
1.
Refer to para. 10-56 for plusnut inspection and replacement.
2.
Inspect rubber strips (19). Replace if damaged.
b. Inspection
a. Removal
11-39. RIGHT REAR UNDERBODY ARMOR MAINTENANCE
This task covers:
a. Removal
c. Installation
b. Inspection
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
• Rear cargo door raised and secured
(TM 9-2320-387-10).
• Fuel filler armor cover opened (TM 9-2320-387-10).
• Right side rocker panel armor and inside
protection plate removed (para. 11-35).
• Right front underbody armor removed
(para. 11-38).
General Safety Instructions
Right rear underbody armor plate is extremely
heavyand must be supported during removal and
installation.
Maintenance Level
Unit
TM 9-2320-387-24-2
11-78
Change 1
