11-30. INSULATION PANEL REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Adhesive (Appendix C, Item 6)
Drycleaning solvent (Appendix C, Item 26)
TM 9-2320-387-24-2
11-54
Change 1
.WARNING.
Dry cleaning solvent is highly flammable. Do not perform this
procedure near fire, flames, or sparks. Injury to personnel and/or
damage to equipment will result.
NOTE
All insulation panels are replaced basically the same. This
procedure covers the roof insulation panel. Refer to facing page art
for locations of other insulation panels.
1.
Remove insulation panel (2) from roof (1).
2.
Clean surface of roof (1) with drycleaning solvent to remove adhesive.
1.
Apply adhesive on roof (1), and install panel (2) on roof (1).
2.
Press surface of panel (2) to ensure adhesion.
b. Installation
a. Removal
Manual References
TM 9-2320-387-24P
General Safety Instructions
Do not perform this procedure near fire, flames or
sparks.
Maintenance Level
Unit
1
2