TM 9-2320-387-24-2
1 l-27. CARGO SHELL DOOR REAR STRIKER MQUNTING PLATE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
Ml114
TM 9-2320-387-24P
Tools
General mechanic’s tool kit:
Equipment Condition
automotive (Appendix B, Item 1)
l Rear striker removed (para. 11-26).
Maintenance and repair shop equipment:
l Cargo shell door strap removed clef%
side only)
Cpara. 11-23).
automotive (Appendix B, Item 2)
Materials/Parts
Six locknuts (Appendix G, Item 130)
Maintenance Level
unit
Personnel Required
One mechanic
One assistant
)
1.
Remove locknut (51, washer (41, and socket-head screw (2) from striker mounting plate (3) and
wheelhouse (8). Discard locknut (5).
2.
Remove five locknuts (61, washers (7), capscrews Cl): washers (91, and striker mounting plate (3)
from wheelhouse (8). Discard locknuts (6).
-1
1.
Install striker mounting plate (3) on wheelhouse 03) with five washers (9), capscrews (11, washers (71,
and locknuts (6).
2.
Install striker mounting plate (3) on wheelhouse (8) with socket-head screw (2), washer (41, and
locknut (5). Tighten locknuts (5) and (6) to 25-30 lb-ft (34-41 N-m).
FOLLOW-ON TASKS: l Install cargo shell door strap (left side only) (para. U-23).
l Install rear striker (para. 11-26).
1 l-50
