TM 9-2320-387-24-2
1 l-3 1. CARGO SHELL DOOR LINER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
elicable
Models
Ml114
TOOIS
?&era1
mechanic’s tool kit:
automotive (Appendix B, Item
Materials/Parts
Twelve clips (Appendix G, Item
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
1)
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-387-10).
23)
Maintenance Level
Unit
1.
Remove ten screws (6), washers (5), clips (4), and two retainers (7) from cargo shell door (1).
2.
Remove twelve fastener clips (8) from liner (3) and door (1). Discard fastener clips (8).
3.
Remove liner (3) and three sound dampeners (2) from door (1).
4.
Clean cargo door (1) to remove adhesive.
-1
1.
2.
3.
4.
Position three sound dampeners (2) on door (1).
Place four fastener clips (8) in two top and two bottom holes of liner (3). Ensure heads of fastener
clips (8) are on side of liner (3) without adhesive.
Peel paper backing (9) from liner (3).
Align liner (3) with door (l), ensuring top and bottom fastener clips (8) in liner (3) align with top and
bottom holes in door (l), and install liner (3) on door (1) with top and bottom fastener clips (8). Press
entire surface of liner (3) to ensure adhesion.
5.
Install eight remaining fastener clips (8) through liner (3) into door (1).
6.
Install two retainers (7) on door (1) with ten clips (4), washers (5), and screws (6).
NOTE
Ensure surface is free of dirt and oil before applying adhesive
backing.
11-56
