11-23. CARGO SHELL DOOR STRAP MAINTENANCE
This task covers:
a. Removal
b. Installation
a.1 Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Two screw-assembled lockwashers
(Appendix G, Item 370)
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-387-10).
Maintenance Level
Unit
1.
Remove two screw-assembled lockwashers (3), footman loop (2), and strap (1) from cargo door (4).
Discard screw-assembled lockwashers (3).
2.
Remove capscrew (6), washer (5), and strap (1) from left gas spring mounting bracket (7).
Refer to para. 10-56 for plusnut inspection and replacement.
NOTE
To assist closing cargo shell door, a grab loop may be added. Refer
to appendix D, fig. D-42.
1.
Apply sealing compound to threads of capscrew (6), and install strap (1) on left gas spring mounting
bracket (7) with washer (5) and capscrew (6). Tighten capscrew (6) to 75 lb-in. (8 N•m).
2.
Install strap (1) and footman loop (2) on cargo door (4) with two screw-assembled lockwashers (3).
Tighten screw-assembled lockwashers (3) to 21 lb-in. (2 N•m).
b. Installation
a.1. Inspection
a. Removal
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-387-10).
TM 9-2320-387-24-2
11-46
Change 1
1
2
3
4
1
6
7
5
