11-21. CARGO SHELL DOOR RETENTION CABLE MAINTENANCE
This task covers:
a.
Removal
b.
Installation
a.1. Inspection
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Two locknuts (Appendix G, Item 109)
Manual References
TM 9-2320-387-24P
Equipment Condition
Forward end of cargo shell door raised
(para. 11-90).
Maintenance Level
Unit
NOTE
It will be necessary to lower cargo shell door slightly to relieve
cable tension during step 1.
1.
Remove locknut (4), shoulder bolt (1), and spring end of cable (5) from cargo door bracket (3).
Discard locknut (4).
NOTE
Perform step 1.1 for right side cable and step 2 for left side cable.
1.1 Remove locknut (6.1), washer (6.2), plate (6.3), cable (5), and shoulder bolt (7) from cargo door
bracket (6). Discard locknut (6.1).
2.
Remove shoulder bolt (7) and cable (5) from cargo shell bracket (6).
Refer to para. 10-56 for plusnut inspection and replacement.
NOTE
Perform step 1 for left side cable and step 1.1 for right side cable.
1.
Apply sealing compound to threads of shoulder bolt (7), and install cable (5) on cargo shell
bracket (6) with shoulder bolt (7).
1.1 Install cable (5) on cargo shell bracket (6) with shoulder bolt (7), plate (6.3), washer (6.2), and
locknut (6.1). Tighten locknut (6.1) to 85-110 lb-in. (10-12 N•m).
2.
Install spring end of cable (5) on cargo door bracket (3) with shoulder bolt (1) and locknut (4).
Tighten locknut (4) to 85-110 lb-in. (10-12 N•m).
b. Installation
a.1. Inspection
a. Removal
TM 9-2320-387-24-2
11-40
Change 1
