TM 9-2320-387-24-2
1 l-1 8. CARGO SHELL DOOR LATCH MAINTENANCE_
This task covers:
a. Removal
b. Installation
c. Adjustment
INITIAL SETUP:
Applicable Models
Ml114
TOOIS
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Three lockwashers (Appendix G, Item 206)
Pushnut (Appendix G, Item 312)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-387-10).
Maintenance Level
Unit
p7cEz-l
I.
Remove pushnut (6), rod end clip (71, and rod (8) from door latch (41. Discard pushnut (6).
2.
Remove three nuts (11, lockwashers (2), capscrews (51, and door latch (4) from cargo door (3). Discard
lockwashers (2).
b. Installation
Install door latch (4) on cargo door (3) with three capscrews (51, lockwashers (21, and nuts (1). Finger-
tighten nuts (1).
c. Adjustment
1.
Loosen three nuts (1) on door latch (4) and cargo door (3).
2.
Close cargo door (3), ensuring latches (4) are fully engaged on door striker pins (9).
3.
Tighten three nuts (1) to 17 lb-R (23 N-m).
4.
Open cargo door and install rod (8) on latch (4) with rod end clip (7) and pushnut (6).
FOLLOW-ON TASKS: l Lubricate door latch (TM 9-2320-387-10).
l Check cargo shell door for proper operation (TM 9-2320-387-10).
1 l-35
