TM 9-2320-387-24-2
1 11-17. CARGO SHELL DOOR HANDLE LATCH REPLACEMENT
-I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
Ml114
TM 9-2320-387-24P
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two pushnuts (Appendix G, Item 312)
Equipment Condition
Forward end of cargo shell door raised
(para. 11-90).
Maintenance Level
Unit
1.
Remove four nuts (4), washers (31, capscrews (5), and washers (3) from handle latch (1) and cargo
door (2).
2.
Pull handle latch (1) out and down until two latch rods (6) are visible.
3.
Remove two pushnuts (9), rod end clips (71, and latch rods (6) from handle latch pivot arms (8) and
remove handle latch (1). Discard pushnuts (9).
b. Installation
1.
Position handle latch (1) to cargo door (2) until two latch rods (6) can be connected to handle latch
pivot arms (8) and install
two latch rods (6) on pivot arms (8) with rod end clips (7) and pushnuts (9).
2.
Install handle latch (1) on cargo door (2) with four washers (31, capscrews (51, washers (31, and
nuts (4).
FOLLOW-ON TASK: Lower cargo shell door (para. 11-90).
11-34
