33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-82
Change 1
1.
Position insert panel (3) on underside of right front floor panel (1) with arrow facing down and
toward front of vehicle.
2.
Using right front seat support (2) as a template, mark twenty-six hole locations (4) on insert panel (3).
3.
Using insert panel (3) as a template, mark thirty-seven hole locations (5) on underside of right front
floor panel (1).
4.
Remove insert panel (3) from right front floor panel (1) and place on suitable work surface.
5.
Drill thirty-seven 0.187-in. (4.75-mm) diameter holes, marked in step 3, through underside of right
front floor panel (1).
6.
Drill twenty-six 0.187-in. (4.75-mm) diameter holes, marked in step 2, through insert panel (3).
h. Right Front Floor Panel and Insert Panel Drilling
DRILL THIRTY-SEVEN 0.187-IN.
(4.75-MM) DIAMETER HOLES
DRILL TWENTY-SIX 0.187-IN.(4.75-MM) DIAMETER HOLES
