33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-78
Change 1
1.
Position metal strip C (2), with arrow facing up and toward metal strip A (5), on insert panel (1).
Align reference lines (4) of metal strip A (5) and C (2) and line (3) with edge of metal strip C (2).
2.
Using metal strip C (2) as a template, locate, mark, and drill eight 0.187-in. (4.75-mm) diameter
holes through insert panel (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (1) and metal strip C (2).
4.
Position metal strip C (2) on insert panel (1) and install with eight rivets (6).
5.
Remove any adhesive residue and clean edges of metal strip C (2) and insert panel (1).
f. Metal Strip C and Insert Panel Assembly
DRILL EIGHT 0.187-IN.
(4.75-MM) DIAMETER
HOLES
