33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-86
Change 1
1.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded area of insert
panel (1).
2.
Apply adhesive sealant to shaded area on underside of right front seat support (2).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded area on under-
side of right front panel (3).
4.
Position insert panel (1) on underside of right front floor panel (3) with arrow facing down and
toward front of vehicle.
5.
Install insert panel (1) on right front seat support (2) and battery tray panel (6) with twenty-six
rivets (5).
6.
Secure insert panel (1) on right front floor panel (3) with thirty-seven rivets (4).
7.
Spot-paint insert panel (1), battery tray panel (6), right front floor panel (3), and right front seat
support (2). (Refer to TM 43-0139.)
j. Insert Panel and Right Front Floor Panel Installation
