33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d)
TM 9-2320-387-24-2
33-80
Change 1
1.
Position battery tray panel (6) on underside of right front floor panel (1), right front seat support (2),
and tunnel (3).
2.
Using right front seat support (2) as a template, mark twenty-two hole locations (5) on battery tray
panel (6).
3.
Using right tunnel (3) as a template, mark fifteen hole locations (4) on battery tray panel (6).
4.
Drill thirty-seven 0.187-in. (4.75-mm) diameter holes, marked in steps 2 and 3, through battery
tray panel (6).
5.
Locate, mark, and drill two 0.187-in. (4.75-mm) diameter holes through holddown bracket (7).
6.
Locate, mark, and drill two 0.187-in. (4.75-mm) diameter holes through holddown bracket (8).
7.
Mark reference lines (10) and (11) on battery tray panel (6).
8.
Position holddown bracket (8) to reference line (11) on battery tray panel (6).
9.
Using holddown bracket (8) as a template, locate, mark, and drill two 0.187-in. (4.75-mm)
diameter holes through battery tray panel (6).
10.
Install holddown bracket (8) on battery tray panel (6) with two rivets (9).
11.
Using battery tray panel (6) as a template, locate, mark, and drill two 0.187-in. (4.75-mm)
diameter holes through holddown bracket (8).
12.
Position holddown bracket (7) to reference line (10) on battery tray panel (6).
13.
Using holddown bracket (7) as a template, locate, mark, and drill two 0.187-in. (4.75-mm)
diameter holes through battery tray panel (6).
14.
Install holddown bracket (7) on battery tray panel (6) with two rivets (9).
15.
Using battery tray panel (6) as a template, locate, mark, and drill two 0.187-in. (4.75-mm)
diameter holes through holddown bracket (7).
g. Right Front Floor Panel and Battery Tray Drilling
2
3
4
5
1
6
