TM 9-2320-387-24-2
28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d)
h. Fourth Clutch, Turbine Shaft, and Overdrive Carrier Assembly Installation
1.
Remove snapring (l), backing plate (2), four clutch plate assemblies (51, and clutch plates (3) from
fourth clutch housing (4).
2.
Install fourth clutch housing (4) on transmission case (61, aligning bolt hole in housing (4) with bolt
hole in case (6).
3.
Install bolt (7) on fourth clutch housing (4). Tighten bolt (7) to 13-17 lb-ft (18-23 Nom).
28-80
