TM 9-2320-387-24-2
I
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)
1
84.
85.
86.
87.
88.
89.
90.
Disconnect harness lead 400D (34) from heater motor (35).
Remove screw (38), washer (37), and harness ground lead 57E (36) from heater motor (35).
Remove two locknuts (331, capscrews (30), clamps (42), and harness (4) from A-beam (31).
Discard locknuts (33).
Disconnect harness connectors 27K (40), 57F (411, and 71C (39) from windshield wiper motor jumper
harness leads (32).
Remove harness (4) from A-beam (31) and guide harness (4) into instrument panel area.
Remove left body mounts (para. 33-3).
Guide harness (4) out through hole in body (19) and remove harness (4) from vehicle.
27-2 1
