TM 9-2320-387-24-2
1 27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)
1
28.
Apply antiseize compound to harness ground lead 95F (7) and install on buss bar (8) with lockwasher (6)
and capscrew (5).
29.
Apply antiseize compound to harness ground lead 95G (25) and install on right rear side marker
light (27) with screw (24) and locknut (26).
30.
31.
Connect harness leads 21E (11),22-46OC (10),23D (41, and 24C (31 to right rear composite light (9).
Install harness (18) on shield (1) with two clamps (20), capscrews (2), and nut and lockwasher
assemblies (19).
32.
Install shield (1) on body (141 with two lockwashers (22) and screws (21).
33.
Install harness (18) on body (14) with clamp (151, capscrew (161, and nut and lockwasher assembly (17).
34.
Install harness (18) on body (14) with two clamps (12) and screws (13).
35.
Connect harness lead 489B (23) at right side marker light (27).
27-26
