TM 9-2320-387-24-2
27-3. BODY WIRING HARNESS REPLACEMENT (Cont’d)
57.
58.
59.
60.
61.
62.
63.
64.
Remove two screws (131, clamps (121, and harness (18) from body (14).
Remove nut and lo&washer assembly (171, capscrew (161, clamp (15), and harness (18) from body (14).
Discard nut and lockwasher assembly (17).
Remove two screws (211, lockwashers (221, and shield (1) from body (14). Discard
~ockw~he~
(2‘2).
Remove two nut and lockwasher assemblies (191, capscrews (21, clamps (201,
and
h=ess (18)
from
shield (1). Discard nut and lockwasher assemblies (19).
Disconnect harness lead 489B (23) from right rear side marker light (27).
Disconnect harness leads 21E (9),2246OC (8), 23D (7), and 24C (3) from right rear composite
light (11).
Remove locknut (241, screw (261, and harness ground lead 95G (25) from right rear side marker light (27).
Discard locknut (24).
Remove capscrew (4), lockwasher (51, and harness ground lead 95F (6) from buss bar (10). Discard
lockwasher (5).
27-16
