TM 9-2320-387-24.2
1
27-3. BODY WIRING HARNESS REPLACEMENT (Cord1
33.
34.
35.
36.
37.
38.
39.
Disconnect wiring harness connector (15) from sensor (13).
Disconnect connectors 4971498 (14) and 4951496 (16) from output and input speed sensors (12) and (17).
Remove two nuts (10, capscrews (81, washers (91, and clamps (10) from sensors (12) and (17).
Disconnect two leads (19) from transfer case switch leads (18) on transfer case (23).
Remove tiedown strap (21) and harness (20) from speedometer adapter (22). Discard tiedown
strap (21).
Disconnect harness connector (24) from Transmission Control Module (TCM) (25).
NOTE
Perform step 39 for Ml114 models only
Remove four screws (271, six clamps (261, five
from body (6). Discard tiedown straps (28).
tiec
down straps (281, harness (30), and winch cables (29)
27-9
