NOTE
Have drainage container ready to catch oil.
1.
Remove drainplug (2) from geared hub (1) and drain geared hub (1). Install drainplug (2) in geared
hub (1) and tighten to 8-13 lb-ft (11-18 N•m).
CAUTION
Do not use sharp objects to aid in removing steering arm cover.
NOTE
It may be necessary to lightly tap steering arm cover with mallet
to loosen from geared hub.
2.
Remove four capscrews (5), washers (4), and steering arm cover (3) from geared hub (1).
6-11. GEARED HUB SPINDLE SEAL REPLACEMENT
This task covers:
a. Removal
b. Installation
Manual References
TM 9-2320-387-24P
Equipment Condition
Wheel removed (para. 8-3).
General Safety Instructions
Ensure locktab on lockwasher is bent
completely into slot on retaining nut.
Maintenance Level
Unit
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Special Tools
Spindle seal installer (Appendix B, Item 109)
Driver handle (Appendix B, Item 60)
Wrench (Appendix B, Item 108)
Materials/Parts
Lockwasher (Appendix G, Item 218)
Seal (Appendix G, Item 424)
Grease (Appendix C, Item 34)
Sealing compound (Appendix C, Item 58)
Lubricating oil (Appendix C, Item 42)
Sealing compound (Appendix C, Item 62)
TM 9-2320-387-24-1
6-30
Change 1
a. Removal
1
2
1
3
4
5
