TM9-2320-387-24-l
1 6-9. GEARED HUB REPLACEMENT (Cont’d)
I
10.
11.
12.
13.
14.
15.
16.
Install tie rod end (4) on geared hub (5) with washer (3) and slotted nut (2). Tighten slotted nut (2) to
70 lb-ft (95 N-m) and install cotter pin (1).
Connect vent line (6) to geared hub fitting (7) and tighten clamp (8).
Install vent line (6) and vent line bracket and clamp (11) on geared hub (51 with washer (10) and
capscrew (9). Tighten capscrew (9) to 38 lb-ft (52 Nom).
Tighten drainplug (14) to 8-13 lb-ft (11-18 N-m).
Remove fill plug (13) and washer (12) from geared hub (5).
Fill geared hub (5) to proper level (para 2-12).
Install washer (12) and fill plug (13) on geared hub (5). Tighten fill plug (13) to 8-13 lb-ft (11-18 Nom).
6-26
